Technical Help

Hi all, I've purchased a passat b6 bkp dsg with no reverse gear. When I first got the car it worked after being parked up for a couple of months. I've scanned it with Carly I will attach the errors. As since the car has lost reverse again and has a error stored in the gearbox and something to do with solenoid 3. I wanted to know if there is anything that can cause this I.e low oil or a service may cure. Or would you recommend removing the unit and repair?

Hi guys. 2mths ago my bke engine siezed after the turbo blew and emptied the sump in less than 300 yards. I have installed a bkc engine out of a 55 plate A3. "my car is an 08 plate touran. The garage are having problems as the car is stuck in limp mode. Its showing a crank senor error. Due to this the car is hard to start and when started will not go over 3000rpm. Is it because this older type engine uses a crank sensor the tourans computer is not compatable with or cannot understand the reading the crank sensor is sending back to it? Really stuck in a rock and a hard place here as they dont know what to do next. The car had a stage 1" tune months before the turbo failure…

hi ive got a vw transporter 1.9 tdi 2006 engine code brr and need a vacuum pump can someone please tell me what the difference is between 038145209 and 038145209P so it just the letter P at the end as it looks the same as mine any info would be great, is it just a different variant thanks

Hi, Could someone please tell me the interval for the timing belt on a 2018 VW Touran 2.0 tdi. Thanks pete