DazzerJ97

Also forgot to mention yes linear from cold to hot on the temp sensor, only think that makes it go down a little is if I turn on the heat in the cabin

Hey unfortunately it's a basic scanner (Carista) however my mechanic may have something that will allow me to do that, so will have a word with him. I presume we would check the live data to verify this? Failing that I presume it would be the harness from my research. Thank you for your input :) will investigate this lead

Hey All, So haven't had to visit here in a while and I now have a problem, which I'm sure is common as heck and ya'll will probably scold me for posting a new thread about it. So It's a p1261 code along with p1264, now the one ending 61 was there when I originally bought the car (scanned it after purchase I know dumb dumb) however it sounds sweet, and runs fine (until recently I'll get to that) the 64 one was there also but I cleared them both at the time and only the 61 returned. However now the 64 has reared it's ugly head. Now I know it is VERY common for the wiring loom to go bad, due to in my opinion a Stupidly place harness. However I figured I'd ask you guys to weigh in on it here's the code's in the entirety and when they were triggered. P1261 – Cylinder 1 pump/injector valve: Control limit exceeded Freeze frame Priority: 0 Malfunction frequency counter: 1 Unlearning counter: 39 Odometer reading: 214197 km Engine speed: 1312.0 RPM Engine torque: 24.0 Nm Vehicle speed: 41.0 km/h Text field: 4.875 uF Text field: 15.25 mJ Text field: 6 mJ P1264 – Cylinder 2 pump/injector valve: Control limit exceeded Freeze frame Priority: 0 Malfunction frequency counter: 2 Unlearning counter: 40 Odometer reading: 214196 km Engine speed: 1792.0 RPM Engine torque: 80.0 Nm Vehicle speed: 5.0 km/h Text field: 4.875 uF Text field: 12.50 mJ Text field: 12 mJ Any recommendations will be greatly appreciated, as now the car intermittently shits it's self and stalls!? only tends to happen when just started and not quiet warm... don't know if it's related or not. If someone could also recommend as to where to get the wiring harness, hoping it's not injectors themselves as 1.can't find them brand new 2. the ones I have found are expensive and there reconditioned ones. Apologies for the lengthy one

Hello All, I'm new here so please be gentle, so I have a Passat (Shock) B6 2.0TDI 2008. Whilst she drives lovely, and the suspension feels normal. She's decided to develop a noise recently, upon going over rough terrain I can here what sounds like saucepans crashing and banging together (No I do not have a saucepan set in the boot) now from what I can see the suspension components look fine, and as mentioned I don't feel a difference in the suspension and also the handling. I have a theory MAYBE it could be an exhaust hanger has packed it's self in. However, before I become a contortionist I'd like to know if there is a typical "common fault" that would perhaps cause this?