Recommended Posts

I also have a problem with my car is vw jetta from 2008 engine 1.9 I put on the tester and I gave an error to the sensor camshaft no signal and I checked the pins on the plug I gave 1 -5v on 2-5v and on three nothing signal at number three I have nothing I could do please help me

Share this post


Link to post
Share on other sites
it's about the camshaft sensor I measured pin 1 I gave 5v 2 the same and 3 I don't have a signal on it but I moved the device on hm and I gave a signal then why does an error appear on the tester that it's the sensor?

Share this post


Link to post
Share on other sites

If it is a 3 pin sensor then it is a digital sensor (active) and requires voltage to function

If it has 2 pins then it is inductive (passive sensor) which does not need a voltage to function

The engine requires moving components to wave past the sensor to create a signal and if the moving component is not to par then it won't work

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...