VW scirocco 2.0tdi abs fault code

[Stevie Goldthorpe]

Afternoon have a 01130 Abs fault code on my Scirocco have been told it needs replaced.  Abs pump part number is 1K0614517BE.

I've seen 2nd Hand replacement ones online but the only thing different is the last 2 letters all other details are the same. 

How do I clarify that the part I'm wanting to buy will fit. 

It says it will fit 2008-2015 

Hopefully someone can help 

Thanks Stevie 

[Volkswagen Owners Club]

Hi Stevie....welcome to the Forum

Here is some info that I have found for this code:

01130 - ABS Operation

01130 - ABS Operation: Implausible Signal

Possible Causes

• Fuse(s) faulty
• Modifications/Retrofits incompatible
• Wiring from/to Brake Electronics Control Module (J104) faulty
  • Electrical Interference from External Sources
    • High Frequency Radiation (e.g. non-insulated Ignition Cable)
• Brake Electronics Control Module (J104) faulty

Possible Solutions

• Check Fuse(s)
• Check Vehicle for Modifications/Retrofits
  • Temporarily remove Modifications/Retrofits (including Wiring)
• Check Wiring from/to Brake Electronics Control Module (J104)
• Check Brake Electronics Control Module (J104)

Special Notes

• This Fault Code can only be cleared after performing a Test Drive above 20 km/h (13 mph).

Also, have found other info which states that sometimes this code appears after heavy braking or rapid acceleration which could cause the wheels to spin or lock up.

Either way, apparently it should clear out after a test drive above 13 mph which will give the system chance to evaluate the sensor readings.
Also, check connections to the ABS pump assembly