Technical Help
Give and receive technical help for your car
79 topics in this forum
-
Hi recently done a g28 sensor and rms on a 2014 crafter 2.0 using the special pressing/ aligning tool. Starts and runs bang on until you drive it. Getting p0322 no crank signal. Where did I go wrong? Cheers
-
- 1 reply
- 3.4k views
-
-
Hi new on here,having problems with my 2011 Passat cc 140 GT TDI, the reverse camera has stuck open has done it a few times,disconnected the battery at first and that seemed to reset it but now that doesn't work and is permantly open the camera still works but can't open boot manually anybody come across this problem and know a fix if any?
-
- 1 reply
- 4.3k views
-
-
hi everyone looking for some help from you ,, I have recently just bought a mk 5 golf 1.6 fsi 2004. the car has been very well maintained and ran perfect until yesterday it all started soon after buying the car the radio was not working the only fault on the car when I got it. so as soon as I got it home I removed it to find the fuse had blown replaced and all seemed fine then yesterday I was out with the polish and started the car to turn it around and boom all sorts of lights no power steering lights where eml abs power steering and a few others so turned it off and started to scrach my head. went to start the car again and no it did not want to just clicking so I…
-
- 1 reply
- 1.6k views
-
-
My VW Eos Sport TSI When pulling a way fast there is a delay and then suddenly springs into action it's a bit hairy if pulling away on a roundabout ? Thanks Mike
-
- 1 reply
- 1.8k views
-
-
New to this but I’ve had to replace my 4 injectors as the their either dead or near to death as their the cars on 174000miles. When I looked at the part number on my old injectors, they were of 04L not 03L. The picture is of the injector which came out my car. I rang a breakers yard and they told me it’s the wrong injector and that my code is 03L. I’ve ordered a new set of injectors with which are the same as the picture below but I’m concerned due to also checking online that they are not meant for mine but were working perfectly for the however long I’ve owned the car. Any help would be appreciated thanks.
-
- 1 reply
- 3k views
-
-
i have a 61 reg passat 2ltr diesel bluemotion its taking 5 attempts to start the car and its annoying as been in vw they thought the battery was fault but i didnt the battery passed all tests took it away took it back the next day same issue then following day they rang said theres petrol in diesel they recommended changing filter, draining the the tank clean it andn line £260 i said no dont drain tank next day pick car up they had drained the tank without permission be great for help cars under warranty
-
- 0 replies
- 17.1k views
-
-
I'm looking for an erg valve for my VW bus. It's a 1974 Porsche 914 t2 air cooled lh drive engine from California. Can anyone help?
-
- 0 replies
- 1.2k views
-
-
hi ive got a vw transporter 1.9 tdi 2006 engine code brr and need a vacuum pump can someone please tell me what the difference is between 038145209 and 038145209P so it just the letter P at the end as it looks the same as mine any info would be great, is it just a different variant thanks
-
- 0 replies
- 654 views
-
-
Hi, My 2012, 2ltr Bluemotion Passat DSG has recently started to give me some gear selection problems. Basically it is an occasional problem, where ,after starting the car ,it is extremely difficult to move the gear selector leaver out of the Park position. It requires extreme force to move the leaver into drive. My vehicle is still under warranty but before taking it into the local dealer, I wondered if anyone else had experienced a similar problem. Would be grateful for any info. on this problem ,as it is very inconvenient to get to the dealer. Thanks Marsh
-
- 0 replies
- 4.1k views
-
-
Hi am new to this site can anyone help ive got a clunkinging sound when I turn right like the drivers front wheels light on the ground pluss I get clunk when reverseing slow feels like drive shaft here goes ive change for new top strut mount both drive shafts anti roll bar and wish bone bushes new water pump plus cam kit and new engine mountings still a clunk can any one shead some light please thanks golf wizard its a golf mk4 gti 2.0 8v on a 2002 plate could it be diff
-
- 0 replies
- 5.2k views
-
-
Hi, I have an 07 3.0V6 TDI Phaeton and have aswitch on left side of steering wheel below dash level which consists of a + and a - with a push button above, it bleeps once when you push either +/- but no apparent effects, any ideas what this is for? Nothing in car manuals. Thanks for taking the time to read this, Ste Byrne.
-
- 0 replies
- 2.5k views
-
-
Hi this is my first entry on this VW site, my wife as a Lupo SDI which is a great car But recently its started draining the battery, an auto electrician looked at it and removed the aftermarket alarm and central locking. three days later it was flat again, I charged the battery and disconnected the negative lead from the battery, today I put an Amp meter between the negative lead and the negative connector and it showed 6.2 amp drain for a few second then went to zero. Help as any one got any Ideas PLEASE.....
-
- 0 replies
- 2.6k views
-
-
hi, Both the key operated central locking and the electric front windows are not working. A local Independent linked their diagnostic machine to the car and it was pointing towards a Central Control Unit or perhaps called a Computer Control Unit, housed within the drivers door. It seems to be an intermittent fault strangely working okay in warmer weather but packing up in wet and colder weather. Does anyone have any experience with this problem please? The car will only lock manually via each door independently and the electric front windows do not work at all. Many thanks, Stephen
-
- 0 replies
- 2.9k views
-
-
Hi, We have a 2014 beetle and we were able to sinc our phones but we can hear people but they can't hear us. The sound is muffled and like we're in a tunnel and very far away.
-
- 0 replies
- 3.4k views
-
-
my Dad's 1973 beetle is not well, he is not sure how to set and adjust carbs; it drives like it's firing on 3 1/2 cylinders not 4. any advice would be appreciated. Eastbourne
-
- 0 replies
- 6.1k views
-
-
Hi Just purchased my first VW. It's a Golf mark 5 1.9tdi match 08. Seller told me to remapp as he has done it on his wife's Audi with same engine. He said big lift in BHP and fuel economy. Well worth doing. Can anyone give advice on pros and cons as I don't want to do something to car that may damage it or have no affect. Thanks Alan
-
- 0 replies
- 2k views
-
-
Hi everyone. Hoping to get some advice about the turbo system on my car.It's a 2005 1.9 TDi PD SE touran.The car would run fine for a mile or two then it'd be like the turbo had stopped working. Just no power at all. Switch off and it'd be ok for a mile or so then it'd happen again. I suspected MAP sensor as something was obviously resetting when it was switched off. After a week or so the emissions workshop light came on so I asked a friend to read it for me. Plugged into reader and it came back, from what I can remember, turbo pressure or something along those lines. Turned out that when I took turbo off the shaft had movement in it so I replaced the full unit. The car …
-
- 0 replies
- 2.9k views
-
-
Hello Polo Members. I have a 57 plate, 5 door Polo and I need to remove the drivers door inner skin to inspect/remove the window regulator module. I have had a go by removing the 3 screws at the bottom. All the plastic popper fixings seem to have come apart okay. Not sure how to tackle the top door release with mirror switch and the lower grab handle with window switch.?? Can anyone advise please, I would be grateful. Thanks Reggie
-
- 0 replies
- 1.3k views
-
-
Anyone managed to install a dual Climatronic heater loom with dash in situ ? Some prat cut the far left plug loom that fits into back of my Climatronic unit (there are three separate plugs in all) during a dash swap and reinstall. I also checked either side of the dash for the left & right temperature sensors and there were no plug loom attached to the sensors and I could not find loom, I had hoped it had fallen back. As a result there’s no control over recirculating flap, no control over left & right temperature flap motors, can’t change direction of air flow to different vents or floor & no AC. However the rest of the functions work that corres…
-
- 0 replies
- 1.3k views
-
-
In case anyone wasn't aware VW Poole are offering to update non-navigation head units to navigation units for £599. I imagine this offer will be available through other dealers too.
-
- 0 replies
- 1.5k views
-
-
wiperbladeshop.co.uk. Anyone used this site..? really cheap for Trico wiper blades by the looks of it but I’m just wondering how good they are.
-
- 0 replies
- 1.7k views
-
-
Hi, As per the title my wife 07 eos developed a weird issue on a long trip last week. Suddenly whilst driving the check engine light came on and the interior fan started going up and down with the accelerator pedal. I took it in to have any fault codes read and it showed up a bunch if codes...all 4 glow plugs, plus a pressure leak/ swirl flap fault? When the codes were cleared they have not returned BUT the interior fan is still coming in when accelerating and speeds up and slows down with the accelerator. This is making me consider a possible wiring issue with a possible cut somewhere in the harness causing a short and meaning that the codes may even not…
-
- 0 replies
- 1.2k views
-
-
Hi there, new to this group. I purchased some new Xenon bulbs from https://xenons4u.co.uk/. One of my bulbs broke, so I bought some new bulbs from https://xenons4u.co.uk/. Top quality and speedy delivery time. If anyone is looking to buy some new bulbs, I highly recommend using them.
-
- 0 replies
- 2.3k views
-
-
-
Hi guys, got a mk8 with the above fault. It was in a smash but all error codes cleared new seatbelts etc so no airbag light or anything. Now digital climate control is not working due to above fault. I am also getting fault code b109ef0. Does anybody know the standard coding for the hvac fault so I can overwrite with vcds? Any help would be appreciated Thanks
-
- 0 replies
- 7.3k views
-